Web/EMS: Inbound Media
Latch Mode
CLI: inbound-media-latch-
mode
[InboundMediaLatchMo
de]
Enables the receipt of media streams whose IP address/port are not
configured for the channel.
 [0] Strict = Accepts only the media stream configured for the
channel.
 [1] Dynamic = (Default) Accepts any media stream.
66.1.5 NFS Parameters
The Network File Systems (NFS) configuration parameters are described in the table
below.
NFS Parameters
Parameter Description
CLI: base-port
[NFSBasePort]
Defines the start of the range of numbers used for local UDP ports used
by the NFS client. The maximum number of local ports is maximum
channels plus maximum NFS servers.
The valid range is 0 to 65535. The default is 47000.
NFS Table
Web: NFS Table
EMS: NFS Settings
[NFSServers]
This table parameter defines up to 16 NFS file systems so that the
device can access a remote server's shared files and directories for
loading cmp, ini, and auxiliary files (using the Automatic Update
mechanism).
The format of this table ini file parameter is as follows:
[NFSServers]
FORMAT NFSServers_Index = NFSServers_HostOrIP,
NFSServers_RootPath, NFSServers_NfsVersion,
NFSServers_AuthType, NFSServers_UID, NFSServers_GID,
NFSServers_VlanType;
[\NFSServers]
For example:
NFSServers 1 = 101.1.13, /audio1, 3, 1, 0, 1, 1;
Note: For a detailed description of this table, see 'Configuring NFS
Settings' on page 129.
To Next Page
Loading...
Need help?
General
