Version 6.6 667 Mediant 800 MSBR
User's Manual 53. USB Storage Capabilities
53 USB Storage Capabilities
The device enables USB storage using an external USB hard drive or flash disk (disk on
key) connected to its USB port. The storage capabilities include the following:
Saving network captures to the USB, using the following CLI command:
# debug capture data physical stop usb
Updating the device's firmware from the USB, using the following CLI command:
# copy firmware from usb://<the .cmp file name>
Updating the device's configuration from the USB, using the following CLI command:
# copy voice-configuration from usb://<the .ini configuration
file name>
Saving current configuration to the USB, using the following CLI command:
# copy voice-configuration to usb://<the .ini configuration
file name>
Note: Only a single USB storage (formatted to FAT/FAT32) operation is supported
at any given time.