CDR Field Name Description
SipTermDesc
Description of SIP termination reason:
 SIP Reason header, if exists, for example: SIP ;cause=200
;text="Call completed elsewhere".
 If no SIP Reason header exists, the description is taken from the
reason text, if exists, of the SIP response code, for example:
"417 Unknown Resource-Priority".
 If no reason text exists in the SIP response code, the description
is taken from an internal SIP response mapping mechanism. For
example, if the device receives a SIP response "422", it sends in
the CDR "422 Session Interval Too Small method" as the
description.
An example of an SBC signaling CDR sent by the device is shown below:
[S=1] |SBCReportType |EPTyp| SIPCallId| SessionId |Orig |SourceIp
|SourcePort |DestIp |DestPort |TransportType |SrcURI
|SrcURIBeforeMap |DstURI |DstURIBeforeMap |Durat |TrmSd |TrmReason
|TrmReasonCategory |SetupTime |ConnectTime |ReleaseTime
|RedirectReason |RedirectURINum |RedirectURINumBeforeMap
|TxSigIPDiffServ |IPGroup (description) |SrdId (name)
|SIPInterfaceId |ProxySetId |IpProfileId (name) |MediaRealmId
(name) |DirectMedia |SIPTrmReason
[S=3] |CALL_END |SBC |170369730753201211288@10.132.10.245 |0 |RMT
|10.132.10.245 |5060 |10.132.10.250 |5070 |UDP |103@audiocodes.com
|103@audiocodes.com |101@10.132.10.250 |101@10.132.10.250 |0 |RMT
|GWAPP_NORMAL_CALL_CLEAR |NO_ANSWER |06:13:54.950 UTC Thu Mar 02
2012 | |06:14:01.175 UTC Thu Mar 02 2012 |-1 | | |40 |2 () |0
(5070SRD) |2 |3 |0 () |0 (lanmedia) |no |CANCEL
59.2.2.2 CDR Fields for SBC Media
The CDR fields for SBC media are listed in the table below. The media CDRs are
published for each active media stream, thereby allowing multiple media CDRs, where
each media CDR has a unique call ID corresponding to the signaling CDR.
CDR Fields for SBC Media
CDR Field Name Description
MediaReportType
Report type (media start, update, or end)
SIPCallId
Unique call ID
Cid
Channel CID
MediaType
Media type (audio, video, or text)
Coder
Coder name
PacketInterval
Coder packet interval
LocalRtpIp
Local RTP IP address
LocalRtpPort
Local RTP port
RemoteRtpIp
Remote RTP IP address
RemoteRtpPort
Remote RTP port
InPackets
Number of received packets
To Next Page
Loading...
Need help?
General
