a confirmation tone is heard.
Web: Hot-line Deactivate
EMS: Hot Line Deactivation
CLI: hotline-deact
[KeyHotLineDeact]
Defines the keypad sequence to deactivate the delayed hotline
option. After the sequence is pressed, a confirmation tone is
heard.
Keypad Feature - Transfer Parameters
Note: See the description of the KeyBlindTransfer parameter for this feature.
Keypad Feature - Call Waiting Parameters
Web: Call Waiting Activate
EMS: Keypad Features CW
CLI: cw-act
[KeyCallWaiting]
Defines the keypad sequence to activate the Call Waiting option.
After the sequence is pressed, a confirmation tone is heard.
Web: Call Waiting Deactivate
EMS: Keypad Features CW
Deact
CLI: cw-deact
[KeyCallWaitingDeact]
Defines the keypad sequence to deactivate the Call Waiting
option. After the sequence is pressed, a confirmation tone is
heard.
Keypad Feature - Reject Anonymous Call Parameters
Web: Reject Anonymous Call
Activate
EMS: Reject Anonymous Call
[KeyRejectAnonymousCall]
Defines the keypad sequence to activate the reject anonymous
call option, whereby the device rejects incoming anonymous
calls. After the sequence is pressed, a confirmation tone is
heard.
Web: Reject Anonymous Call
Deactivate
EMS: Reject Anonymous Call
Deact
[KeyRejectAnonymousCallDe
act]
Defines the keypad sequence that de-activates the reject
anonymous call option. After the sequence is pressed, a
confirmation tone is heard.
66.11.11 General FXO Parameters
The general FXO and FXS parameters are described in the table below.
General FXO and FXS Parameters
Parameter Description
FXS Parameters
Web: FXS Coefficient Type
EMS: Country Coefficients
CLI: fxs-country-coefficients
[FXSCountryCoefficients]
Determines the FXS line characteristics (AC and DC)
according to USA or Europe (TBR21) standards.
ï‚§ [66] Europe = TBR21
ï‚§ [70] USA = (Default) United States
Note: For this parameter to take effect, a device reset is
required.
FXO Parameters
Web: FXO Coefficient Type
EMS: Country Coefficients