Accounts Registration Status: registration status based on the Accounts table
(configured in 'Configuring Account Table' on page
225):
• Group Type: type of served group - Trunk Group or IP Group
• Group Name: name of the served group, if applicable
• Status: indicates whether or not the group is registered ("Registered" or
"Unregistered")
BRI Phone Number Status:
• Phone Number: phone number of BRI endpoint
• Module/Port: module/port number of BRI endpoint
• Status: indicates whether or not the BRI endpoint is registered ("Registered" or
"Unregistered")
Note: The registration mode (i.e., per device, endpoint, account. or no registration)
is configured in the Hunt Group Settings table (see 'Configuring Hunt Group
Settings' on page 297) or using the TrunkGroupSettings ini file parameter.
57.9 Viewing Call Routing Status
The Call Routing Status page provides you with information on the current routing method
used by the device. This information includes the IP address and FQDN (if used) of the
Proxy server with which the device currently operates.
To view call routing status:
Open the Call Routing Status page (Status & Diagnostics tab > VoIP Status menu >
Call Routing Status).
Figure 57-8: Call Routing Status Page
Call Routing Status Parameters
Parameter Description
Call-Routing Method
Proxy/GK = Proxy server is used to route calls.
Routing Table = Outbound IP Routing table is used to route calls.
IP Address
Not Used = Proxy server isn't defined.
To Next Page
Loading...
Need help?
General
