AudioCodes Media 800 MSBR User Manual

Version 6.6 713 Mediant 800 MSBR
User's Manual 59. Reporting Information to External Party
59.3 Configuring RADIUS Accounting
The device can send accounting data of SIP calls as call detail records (CDR) to a RADIUS
Accounting server. The device can send the accounting messages to the RADIUS server
upon call release, call connection and release, or call setup and release. For a list of the
CDR attributes, see the table following the procedure below.
Notes:
• For RADIUS accounting settings to take effect, you must save the
settings to flash memory with a device reset.
• For a description of the RADIUS accounting parameters, see 'RADIUS
Parameters' on page 789.
 To configure RADIUS accounting:
1. Open the RADIUS Parameters page (Configuration tab > VoIP menu > SIP
Definitions submenu > RADIUS Parameters Settings).
Figure 59-3: RADIUS Accounting Parameters Page
2. Configure the parameters as required.
3. Click Submit.
The table below describes the RADIUS Accounting CDR attributes included in the
communication packets transmitted between the device and a RADIUS server.
Supported RADIUS Accounting CDR Attributes
Attribute
Number
Attribute
Name
Vendor
Specific
Attribute
(VSA) No.
Purpose
Value
Format
Example AAA
Request Attributes
1 user-name - Account number or
calling party number
or blank
String up
to 15
digits
long
542138574
7
Start Acc
Stop Acc
4 nas-ip-
address
- IP address of the
requesting device
Numeric 192.168.14.
43
Start Acc
Stop Acc
6 service-type - Type of service
requested
Numeric 1: login Start Acc
Stop Acc
26 h323-
incoming-
conf-id
1 SIP call identifier Up to 32
octets
- Start Acc
Stop Acc

AudioCodes Media 800 MSBR Specifications

General

Brand	AudioCodes
Model	Media 800 MSBR
Category	Network Router
Language	English