to the IP addresses that you want to delete, and then click Delete Selected
Addresses; the IP addresses are removed from the table and these IP addresses can
no longer access the Web and Telnet interfaces.
4. To save the changes to flash memory, see 'Saving Configuration' on page 624.
Notes:
• The first authorized IP address in the list must be your PC's (terminal) IP
address; otherwise, access from your PC is denied.
• Delete your PC's IP address last from the 'Web & Telnet Access List
page. If it is deleted before the last, subsequent access to the device
from your PC is denied.
5.9 Configuring RADIUS Settings
The RADIUS Settings page is used for configuring the Remote Authentication Dial In User
Service (RADIUS) accounting parameters. For a description of these parameters, see
'Configuration Parameters Reference' on page 755.
 To configure RADIUS:
1. Open the RADIUS Settings page (Configuration tab > System menu > Management
submenu > RADIUS Settings).
Figure 5-28: RADIUS Parameters Page
2. Configure the parameters as required.
3. Click Submit to apply your changes.
4. To save the changes to flash memory, see 'Saving Configuration' on page 624.
To Next Page
Loading...
Need help?
General
