Version 5.8 105 October 2009
SIP User's Manual 3. Web-Based Management
5. Configure an outgoing mail server:
Figure 3-87: Defining Outgoing Mail Server
a. Server: enter the hostname of your outgoing (SMTP) server.
b. From Email Address: each email requires a 'from' address and some outgoing
servers refuse to forward mail without a valid 'from' address for anti-spam
considerations.
c. Port: enter the port that is used by your outgoing mail server.
d. Server Requires Authentication: if your outgoing mail server requires
authentication, select this check box and enter your user name and password in
the 'User Name' and 'Password' fields respectively.
6. Under the 'Security Logging' group, configure the following parameters:
• Security Log Buffer Size: size of the security log buffer in Kilobytes.
• Remote Security Notify Level: remote security notification level - None, Error,
Warning, and Information.
• Persistent Security Log: select this check box to save the security log to the flash
memory.
7. Click OK to save your settings.
You can assemble your defined users into different groups, based on different criteria, for
example, home users versus office users. By default, new users are added to the default
group "Users".
To Next Page
Loading...
Need help?
General
