Version 5.8 537 October 2009
SIP User's Manual 9. IP Telephony Capabilities
Figure 9-48: Configuring Username and Password for Authenticating Channels 5-8
7. In the 'Account Table' page (refer to ''Configuring the Account Table'' on page 157),
configure a single Account for Hunt Group ID #1, including an authentication user
name and password, and enable registration for this Account to ITSP 1 (i.e., Serving
IP Group is 1).
Figure 9-49: Configuring Account for Registration to ITSP 1 in Account Table Page
8. In the 'IP to Trunk Group Routing' page (refer to ''Configuring the IP to Trunk Group
Routing'' on page 206), configure that
INVITEs with "ITSP1" as the hostname in the
From URI are routed to Hunt Group #1, and INVITEs with "ITSP2" as the hostname in
the From URI are routed to Hunt Group #2. In addition, configure calls received from
ITSP1 as associated with IP Group #1.
Figure 9-50: Configuring ITSP-to-Hunt Group Routing in IP to Hunt Group Table Page
9. In the 'Tel to IP Routing' page (refer to ''Configuring the Tel to IP Routing Table'' on
page 201), configure Tel-to-IP routing rules
for calls from Hunt Group #1 to IP Group
#1, and from Hunt Group #2 to IP Group #2.
Figure 9-51: Configuring Hunt Group to ITSP Routing
To Next Page
Loading...
Need help?
General
