SIP User's Manual 272 Document #: LTRT-12801
MP-500 MSBG
4.2.1 Format Rules
The ini file must adhere to the following format rules:
îš„ The ini file name must not include hyphens (-) or spaces; if necessary, use an
underscore (_) instead.
îš„ Lines beginning with a semi-colon (;) are ignored. These can be used for adding
remarks in the ini file.
îš„ A carriage return (i.e., Enter) must be done at the end of each line.
îš„ The number of spaces before and after the equals sign (=) is irrelevant.
îš„ Subsection names for grouping parameters are optional.
îš„ If there is a syntax error in the parameter name, the value is ignored.
îš„ Syntax errors in the parameter's value can cause unexpected errors (parameters may
be set to the incorrect values).
îš„ Parameter string values that denote file names (e.g., CallProgressTonesFileName),
must be enclosed with inverted commas ('…'), e.g., CallProgressTonesFileName =
'cpt_usa.dat'
îš„ The parameter name is not case-sensitive.
îš„ The parameter value is not case-sensitive, except for coder names.
îš„ The ini file must end with at least one carriage return.
4.2.2 Format of Individual Parameters
The format of individual ini file parameters includes an optional, subsection name (group
name) followed by parameter settings on the next lines, as shown below:
[subsection name]
; the subsection name is optional.
Parameter_Name = Parameter_Value
Parameter_Name = Parameter_Value
; Remark
An example of an ini file containing individual ini file parameters is shown below:
[System Parameters]
SyslogServerIP = 10.13.2.69
EnableSyslog = 1
; these are a few of the system-related parameters.
[Web Parameters]
LogoWidth = '339'
WebLogoText = 'My Device'
UseWeblogo = 1
; these are a few of the Web-related parameters.
[Files]
CallProgressTonesFileName = 'cpusa.dat'
To Next Page
Loading...
Need help?
General
