Version 5.8 71 October 2009
SIP User's Manual 3. Web-Based Management
Icon Name Description
Copy
Copies an item to the clipboard.
Move Up
Moves an entry one place up in the table.
Move Down
Moves an entry one place down in the table.
Once you have added an entry in a table, you can later disable the entry by clearing the
check box corresponding to the entry. For example, you can temporarily disable an access
rule, by clearing the check box, as shown below.
Figure 3-45: Disabling Table Entries
3.4.3.1.2 Using the Configuration Buttons
Throughout the Data section of the Web interface, various buttons appear in the
configuration pages, as described in the table below:
Table 3-9: Description of the Main Configuration Buttons
Button Name Description
OK
Applies and saves the settings.
Apply
Applies the settings.
Cancel
Disregards your settings.
Refresh
Refreshes the page, updating the configuration values
or status.
Resolve Now
Verifies or validates a setting, for example, that a valid
Web site exists at a specified URL.
Close
Closes the page and returns you to the previously
opened page.
Advanced
Shows additional (advanced) fields on the page.
Basic
Hides the advanced fields (if previously shown by
clicking the Advanced button).
The above table describes the main configuration buttons. Buttons specific to a certain
configuration is explained later in the relevant section.
To Next Page
Loading...
Need help?
General
