SIP User's Manual 244 Document #: LTRT-12801
MP-500 MSBG
3.5.2.3 Backing Up and Restoring Configuration
You can save a copy/backup of the device's current configuration settings (Voice) as an ini
file to a folder on your PC, using the 'Configuration File' page. The saved ini file includes
only parameters that were modified and parameters with other than default values. The
'Configuration File' page also allows you to load an ini file to the device. If the device has
"lost" its configuration, you can restore the device's configuration by loading the previously
saved ini file or by simply loading a newly created ini file.
Note:
When loading an ini file using this Web page, parameters not included in the
ini file are reset to default settings.
¾ To save and restore the ini file:
1. Open the 'Configuration File' page (Management tab > Software Update menu >
Configuration File).
Figure 3-191: Configuration File Page
2. To save theVoice ini file to a folder on your PC, perform the following:
a. Click the Save INI File button; the 'File Download' dialog box appears.
b. Click the Save button, navigate to the folder in which you want to save the ini file
on your PC, and then click Save; the device copies the ini file to the selected
folder.
3. To save the Data configuration ini file to a folder on your PC, perform the following:
a. Under the 'Save the Data configuration file to the PC' group, click the Save File
button; the 'File Download' dialog box appears.
b. Click the Save button, navigate to the folder in which you want to save the file on
your PC, and then click Save; the device saves the Data ini file to the selected
folder.
To Next Page
Loading...
Need help?
General
