SIP User's Manual 336 Document #: LTRT-12801
MP-500 MSBG
6.7.2 IP Group, Proxy, Registration and Authentication Parameters
The IP Groups, proxy server, registration and authentication SIP parameters are described
in the table below.
Table 6-23: IP Groups, Proxy, Registration and Authentication SIP Parameters
Parameter Description
Web: IP Group Table
EMS: SIP Endpoints > IP Group
[IPGroup]
This ini file table parameter configures the IP Group table. The
format of this parameter is as follows:
[IPGroup]
FORMAT IPGroup_Index = IPGroup_Type,
IPGroup_Description, IPGroup_ProxySetId,
IPGroup_SIPGroupName, IPGroup_ContactUser,
IPGroup_EnableSurvivability, IPGroup_ServingIPGroup,
IPGroup_SipReRoutingMode,
IPGroup_AlwaysUseRouteTable, IPGroup_RoutingMode,
IPGroup_SRD, IPGroup_MediaRealm,
IPGroup_ClassifyByProxySet, IPGroup_ProfileId;
[\IPGroup]
For example:
IPGroup 1 = 0, "dol gateway", 1, firstIPgroup, , 0, -1, 0, 0, -1,
0, mrealm1, 1, 1;
IPGroup 2 = 0, "abc server", 2, secondIPgroup, , 0, -1, 0, 0, -1,
0, mrealm2, 1, 2;
IPGroup 3 = 1, "IP phones", 1, thirdIPGroup, , 0, -1, 0, 0, -1, 0,
mrealm3, 1, 2;
Notes:
 This table parameter can include up to 9 indices (1-9).
 For a detailed description of the ini file table's parameters
and for configuring this table using the Web interface, refer
to ''Configuring the IP Groups'' on page 152.
 For an explanation on using ini file table parameters, refer
to ''Format of ini File Table Parameters'' on page 273.
To Next Page
Loading...
Need help?
General
