EasyManuals Logo
Home>AudioCodes>Gateway>mediapack MP-500

AudioCodes mediapack MP-500 User Manual

AudioCodes mediapack MP-500
574 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #309 background imageLoading...
Page #309 background image
Version 5.8 309 October 2009
SIP User's Manual 6. Configuration Parameters Reference
6.4 Security Parameters
This subsection describes the device's security parameters.
6.4.1 HTTPS Parameters
The Secure Hypertext Transport Protocol (HTTPS) parameters are described in the table
below.
Table 6-15: HTTPS Parameters
Parameter Description
Web: Secured Web Connection
(HTTPS)
EMS: HTTPS Only
[HTTPSOnly]
Determines the protocol used to access the Web interface.
[0] HTTP and HTTPS (default).
[1] HTTPs Only = Unencrypted HTTP packets are blocked.
Note: For this parameter to take effect, a device reset is
required.
EMS: HTTPS Port
[HTTPSPort]
Determines the local Secured HTTPS port of the device.
The valid range is 1 to 65535 (other restrictions may apply
within this range).
The default port is 443.
Note: For this parameter to take effect, a device reset is
required.
EMS: HTTPS Cipher String
[HTTPSCipherString]
Defines the Cipher string for HTTPS (in OpenSSL cipher list
format). For the valid range values, refer to URL
http://www.openssl.org/docs/apps/ciphers.html
.
The default is ‘EXP’ (Export encryption algorithms). For
example, use ‘ALL’ for all ciphers suites. The only ciphers
available are RC4 and DES, and the cipher bit strength is limited
to 56 bits.
Notes:
If the “Strong Encryption” feature key is enabled, the default
of the HTTPSCipherString parameter is changed to
‘RC4:EXP’, enabling RC-128bit encryption.
The value ‘ALL’ can be configured only if the “Strong
Encryption” feature key is enabled.
Web: HTTP Authentication Mode
EMS: Web Authentication Mode
[WebAuthMode]
Determines the authentication mode for the Web interface.
[0] Basic Mode = Basic authentication (clear text) is used
(default).
[1] Digest When Possible = Digest authentication (MD5) is
used.
[2] Basic if HTTPS, Digest if HTTP = Digest authentication
(MD5) is used for HTTP, and basic authentication is used for
HTTPS.
Note: When RADIUS login is enabled (i.e., the parameter
WebRADIUSLogin is set to 1), basic authentication is forced.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes mediapack MP-500 and is the answer not in the manual?

AudioCodes mediapack MP-500 Specifications

General IconGeneral
BrandAudioCodes
Modelmediapack MP-500
CategoryGateway
LanguageEnglish

Related product manuals