Version 5.8 239 October 2009
SIP User's Manual 3. Web-Based Management
3.5.2.1.1 Loading Auxiliary Files using Web Interface
The auxiliary files can be loaded to the device using the Web interface's 'Load Auxiliary
Files' page, as described in the procedure below.
Notes:
• When loading an ini file, the settings of parameters that are excluded
from the loaded ini file are retained (incremental).
• Saving an auxiliary file to flash memory may disrupt traffic on the device.
To avoid this, disable all traffic on the device by performing a graceful
lock (refer to ''Locking and Unlocking the Device'' on page 236).
• You can schedule automatic loading of updated auxiliary files using
HTTP/HTTPS (refer to the Product Reference Manual).
¾ To load an auxiliary file to the device using the Web interface:
1. Open the 'Load Auxiliary Files' page (Management tab > Software Update menu >
Load Auxiliary Files page item).
Figure 3-187: Load Auxiliary Files Page
2. Click the Browse button corresponding to the file type that you want to load, navigate
to the folder in which the file is located, and then click Open; the name and path of the
file appear in the field next to the Browse button.
To Next Page
Loading...
Need help?
General
