SIP User's Manual 234 Document #: LTRT-12801
MP-500 MSBG
3.5.1.2 Configuring the Regional Settings
The 'Regional Settings' page allows you to define and view the device's internal date and
time.
¾ To configure the device's date and time:
1. Open the 'Regional Settings' page (Management tab > Management Configuration
menu > Regional Settings page item).
Figure 3-183: Regional Settings Page
2. Enter the current date and time in the geographical location in which the device is
installed.
3. Click the Submit button; the date and time are automatically updated.
Notes:
• If the device is configured to obtain the date and time from an SNTP
server (refer to ''Configuring the Application Settings'' on page 62), the
fields on this page are read-only and cannot be modified.
• For an explanation on SNTP, refer to ''Simple Network Time Protocol
Support'' on page 545.
• After performing a hardware reset, the date and time are returned to their
defaults and therefore, should be updated.
3.5.1.3 Maintenance Actions
The 'Maintenance Actions' page allows you to perform the following operations:
îš„ Reset the device (refer to ''Resetting the Device'' on page 235)
îš„ Lock an
d unlock the device (refer to ''Locking and Unlocking the Device'' on page 236)
îš„ Save the conf
iguration to the device's flash memory (refer to ''Saving Configuration'' on
page 237)
To Next Page
Loading...
Need help?
General
