Midas HD96-24-CC-TP User Manual

104 HD96-24-CC-TP User Manual
Matrix Linking & Stereo page
Available link options are displayed for Matrices on the right-hand side of the widget. Choose link mode as described in Input channel linking.
Note: Matrices cannot be panned as they are last in the signal path.
Linking the Master Channels
You can link the left and right master channels in a two-way link (left and right) or as a single stereo fader, both of which use the linking parameters set for the left
master channel.
To link the left and right master channels
1. In the left master channel (control surface), press its SEL button (just above the fader) to select it.
2. Navigate to the Master Channel Conguration page in either the Home, Channel View or FOH widgets.
3. Set the link type for the left master channel by long holding Link or Stereo until the line has traced around the outside and the button turns orange.

Midas HD96-24-CC-TP Specifications

General

Brand	Midas
Model	HD96-24-CC-TP
Category	DJ Equipment
Language	English