125 HD96-24-CC-TP User Manual
Chapter 15. Internal Eects
This chapter describes the internal eects of the HD96-24. Initially, it explains how to use the surface and GUI to operate the eects and then details all of their
available control functions and their use.
Eects overview
Eects can be assigned in two main ways. Either by adding in a channel or in the Eects rack. They can be used as an insert on any path or patched via an Aux send and
returned to a channel of your choice. For example, this can be used to send several paths to the same reverb. Up to 24 DSP slots are available and eects are assigned
dependant on their DSP value. For example, many eects can have many instances in an Eect slot (sub-slots) or take up 3 entire slots (VSS4) if they require the
processing power.
The Eect Rack can be found in the side bar menu and gives an overview of all the eect within the system. It can be added to the top bar menu by dragging it from
the Customise Toolbar menu.
To Next Page
Loading...
Need help?
General
