272 HD96-24-CC-TP User Manual
Chapter 30. Outputs
This chapter shows you the areas on the surface that are used to manage the outputs and also describes their function. There are ve types of output: exi aux, auxes,
group, masters and matrices. All output channel strips can be seen in the GUI by selecting the outputs tab in the navigation page. Dierent widgets can be recalled by
touching in each section of the output channel strip overview area.
It’s important to know the dierence between the dierent output types:
PATHS
FROM TO AUX TO FLEXI AUX TO MASTER TO MATRIX
INPUT YES YES YES YES
FLEXI AUX YES NO YES YES
AUX NO NO YES YES
MASTER NO NO NO YES
MATRIX NO NO NO NO
Outputs on Channel Banks
Any output, be it Flexi Aux, Aux, Group or Matrix can be assigned to any of the 4 banks on the control surface. In general bank 3 is used to show aux or matrix outputs
with bank 1&2 generally assigned to show inputs but this is fully customisable. This exibility allows quick adjustments of contributions to auxes or matrices using
ip mode.
Tip: This is a great way to manage multiple in-ear mixes with up to 8 stereo Aux mixes displayed on a bank at any time. The Output global shortcut can be used to tab
through all the aux sends or a POP group can be set up to recall Aux sends to the bank you require.
To Next Page
Loading...
Need help?
General
