240 HD96-24-CC-TP User Manual
Master to Matrix Post-Processing
This is the last option in the delay compensation page. You have a choice of tap-o point, so you can choose to send either a pre-master or post-master channel
processed signal to the matrix channels. This is a global setting and aects all master -> matrix contributions.
The signal path that feeds master bus signals onto matrix channels is fully compensated for, so that signals fed directly to matrix channels or indirectly to matrix
channels via master channels will always line up at the outputs, as will signals sent only to masters or only to matrix channels.
To Next Page
Loading...
Need help?
General
