86 HD96-24-CC-TP User Manual
Linking & Stereo
The Linking page is where channels can be set to be Mono, linked as two Mono Channels or combined on one fader to function as a fully stereo channel, plus which
channel parameters will be linked or act independently from each other.
1. Mono. The channel is Mono.
2. Link. Two adjacent mono channels linked together.
3. Stereo. Two adjacent channels linked as above but controlled by one a single fader. Use the SEL button to switch between the left and right view of the channel or
press the channel name on widget.
4. Pan position and meter information.
5. A choice of Independent or Mirror pan link mode.
6. Selectable options which will link or unlink various channel controls. See chapter 9 on Linking for more information.
To Next Page
Loading...
Need help?
General
