179 HD96-24-CC-TP User Manual
Rotor Motor
Rotary Motor emulates the sound of a Leslie rotating speaker. The Rotary Motor provides more exibility than the original and can be used with a variety of
instruments, and even vocals, to create a whirling, psychedelic eect. The Low Speed and High-Speed controls adjust the rotational speed of the Slow and Fast Speed
selection and can be toggled with the Slow/Fast switch. The Acceleration controls adjusts how quickly the speed increases and decreases from the Slow mode to the
Fast mode. The rotation eect can also be disengaged with the Stop switch, which will stop the movement of the speakers. Distance adjusts the distance between the
Rotary speakers and the virtual microphone. Balance adjusts the level between the low and high virtual microphones.
Item Control Function
1 Lo Speed - Control Adjusts the speed of the Slow mode selection. Range 0.1 Hz - 4 Hz
2 Hi Speed - Control Adjusts the speed of the Fast mode selection. Range 2 Hz - 10Hz
3 Acceleration - Control
The Acceleration control adjusts how quickly the speed increases and decreases from the Slow mode
to the Fast mode. 0.0% to 100%
4 Distance - Control
Distance adjusts the distance between the Rotary speakers and the virtual microphones.
0.0% to 100%
5 Balance - Control
Adjusts the balance between the virtual horn and virtual drum controlling the signal tone.
-100 (drum) to 100.0 (horn).
6 Mix - Control Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals. 0.0% to 100%
7 Motor - Button Allows The rotation eect of the motor to be disengaged (Stop).
8 Speed - Button Selects either the slow or fast speeds for rotation.
9 Input Metering Metering shows either input level.
10 Output Metering Metering shows either output level.
To Next Page
Loading...
Need help?
General
