222 HD96-24-CC-TP User Manual
To patch a P16-M:
1. Select the Busses or Direct Out tab from the left side of the patching workow.
2. Select Ultranet from the right-side patching tab.
3. After unlocking the patching page select the Output(s) or Direct Out(s) you wish to patch.
4. Select the Ultranet port you wish to use (Port 1 or 2)
5. Now select the Ultranet outputs you wish to use (1-16).
To use other Ultranet enabled devices navigate to Expansion Cards page in the side bar menu. Here you will nd the ultranet tab which the selection of various Ultranet
enabled products.
1. Select either Port 1 or 2.
2. Navigate the 4 pages, each has the settings for 4 Ultranet outputs.
3. This button navigates you directly to the patching page if required.
4. Displays the current patch path.
5. Selects the Ultranet device type from the drop down list.
6. Select the prole you require.
7. Select an EQ preset if required.
Using External USB Equipment
A standard USB keyboard can be used in either the Fader Port USB hub (Not the USB Hub).
Warning: Do not use a USB mouse. Although a mouse can be plugged in and used in a USB port there will be no mouse pointer and it is possible to click
buttons by accident.
Using External Displays
Currently HDMI 1 is not in use but will be used in the future to display scene and metering information. HDMI 2 mirrors the GUI and can displays all the same
information as the main touch screen. In the future functionality of these ports will be greatly increased. For example, HDMI 1 will be used to display metering and
scene information in an impending update.
To Next Page
Loading...
Need help?
General
