210 HD96-24-CC-TP User Manual
Note: Copy Actions works with all 3 modes, Recall Scope, Store Scope and Parameters.
Store Scope Mode
Although store scope is sometimes useful in very specic situations, it must always be used with care. This is because it is possible that control settings will not be
stored at all and will consequently be lost. Therefore, it is much safer to use recall scope and always store everything.
Please use store scope with great care and observe the caution above. All of the methods of the recall scope operation, as detailed in this chapter, apply equally to store
scope. It is advised that the master scene is kept out of the Store Scope so that settings are stored.
Sometimes it's worth using this feature to specically stop something from being overwritten. This could actually be the master scene in some cases if you hand over
a show to an operator and don't want changes to be made. For a theatre show, store scope all outputs to protect all the system EQ and time aligning. Leaving the user
to change the inputs accordingly day to day.
1. Store Scope – Press to enter Store Scope Mode.
2. The Grid – Channels with cells in Store Scope are highlighted with a blue padlock.
3. Set Store Scope – This activates Store Scope on any selected cells.
4. Remove Store Scope – This clears any selected active Store Scopes.
To Next Page
Loading...
Need help?
General
