Midas HD96-24-CC-TP User Manual

12 HD96-24-CC-TP User Manual
• • Swept all pass lter with a choice of two options of phase range with low and high optimization.
• • Frequency-conscious compressor with choice of four compression styles.
• • Frequency-conscious noise gate with external side chain.
• • Insert point. (half normalized i.e. the insert send can be used as a channel direct output, even if the insert return isn't switched in).
• • 4 Band Parametric EQ lter with various lter options.
• • Routing via level controls to 120 mix busses.
• • Routing via pan control to left and right master busses.
• • Routing to mono master bus.
• • Direct output. Choice of 3 pick-o points, with independent output level/mute.
• • 3 Slots for FX inserts
Mix channel processing
Each of the auxiliary mix busses has:
• • Group or Mix mode.
• • Dual mono or stereo pair modes. Mono, Linked or Stereo where a single fader controls 2 linked adjacent paths.
• • Up to 4-band PEQ.
• • Frequency-conscious compressor with choice of four compression styles.
• • Insert point.
• • Routing via level controls to the matrix busses.
• • Routing via pan control to the left, right and mono master busses.
• • Direct input with independent input level/mute.
Output channel processing
Each of the matrix busses has:
• • Up to 4-band PEQ.
• • Four-mode frequency-conscious compressor with soft clip limiter and external side chain.
• • Insert point.
• • Direct input.
Each of the three master output busses has:
• • Up to 4-band PEQ.
• • Four-mode frequency-conscious compressor with soft clip limiter and external side chain.
• • Insert point.
• • Direct input.
• • Routing via level controls to the matrix busses.
Audio Physical Connections
The maximum total number of physical analogue XLR connections possible on a HD96-24 is 488 plus talk line in and talkback mic in on the rear of the surface.
The maximum number of 488 congurable I/O can be increased up to 654 (488 analogue + up to 128 CM1 + 32 ULTRANET + 4 AES3) depending on the combination of
dierent types of I/O card can be used.
All of the congurable I/O are freely routable on a scene-by-scene basis.
Network
The network of the HD96-24 utilises the physical connectivity of Ethernet (EtherCon® connectors and Cat 5e/copper cable) but replaces its data protocol with AES50
protocol (implemented as SuperMac) and the HyperMac high capacity system, which are more suited to high quality, low latency audio distribution. The use of the AES
standard allows straightforward interfacing with any third-party hardware that also utilises this connection.

Midas HD96-24-CC-TP Specifications

General

Brand	Midas
Model	HD96-24-CC-TP
Category	DJ Equipment
Language	English