111 HD96-24-CC-TP User Manual
Solo System
The solo system section controls are found in the Monitor Control Settings page:
1. Solo In Place – Activates solo in place. Use with caution and remember to turn o.
2. PFL level control – PFL audio bus may accept injected external signals. This control adjusts the pre-fader level in the range innity (∞) to 10 dB.
3. AFL level control – AFL audio bus may accept injected external signals. This control knob adjusts the after-fader level in the range innity (∞) to 10 dB.
4. Input Select Follows Solo – When an input is soloed it is also selected.
5. Output Select Follows Solo – When an output is soloed it is also selected.
6. Input Solo Follows Select – When an input is selected it is automatically sent to the solo bus.
7. Output Solo Follows Select – When an output is selected it is automatically sent to the solo bus.
8. Monitor Output Swap – When active the Monitor A and B are reversed (including all patching). For example, if using an in ear monitor and listening monitor
speaker this button allows you to quickly send monitoring signals going to the speaker to be audible in your in ear instead.
The above settings are also duplicated in the Home Overview workow and can be accessed by pressing the cog icon next to fader ip.
To Next Page
Loading...
Need help?
General
