Midas HD96-24-CC-TP User Manual

193 HD96-24-CC-TP User Manual
4. Press the Copy and Paste icon again to exit copy and paste mode. The source channel will then return to its default blue colour.
5. The Copy All button allows you to copy a complete channel to other channels of the same type.
6. Cancel closes the copy and paste window. It does not undo the copy and paste function.
Channels Versus Scenes
The fundamental dierence between copying through channels and copying through scenes is that the former is location-based, while the latter can be thought of as
being time-based. However, the areas (and parameters) that are copied across are similar.
Copy and Paste Parameters
CONFIG – Preamp Gain, Trim (not 48v), Polarity, Delay time and on/o state, talk bus setting, aux return state, direct in out, processing order, Insert and link options.
EQ – Equaliser parameters.
FILTERS – Phase, LPF and HPF parameters.
GATE – Gate and side chain parameters.
COMP - Compressor and side chain parameters.
SENDS – Send levels, pan, on/o state, pre/post fade, tap o points.
MAN BUS – Pan, Level to Master and Mono bus and on/o state.
MUTES – Mute status (not including Mute Groups).

Midas HD96-24-CC-TP Specifications

General

Brand	Midas
Model	HD96-24-CC-TP
Category	DJ Equipment
Language	English