292 HD96-24-CC-TP User Manual
Manchino Sends Page
"With great power comes great responsibility"
The sends page revolutionises how engineers interact with a console. Multiple send levels can be changed to many destinations, all relative to the original values. For
example, when 3 members of the band all ask the monitor engineer for “more drums” in their in-ear monitors (IEMs) at once simply select the Drum POP group, select
their IEM Auxes, then add level, which relatively adds the same amount of level to each drum, to each person in one smooth action.
1. Select either Multiple Select or Solo mode for Aux and Matrix paths. Solo allows you to listen to the selected output path in the solo bus. Multiple Select allows a
number of output paths to be selected at once (press and hold to select all in a similar way to selecting all inputs).
2. Select via the tabs Aux 1-64, Aux 65-96 or Matrices 1-24. Please note that the press and hold select all function only selects the auxes viewable in that page. For
example, if you select all Auxes 1-64, Auxes 65-96 in the second tab won’t be selected.
3. Indicates the selected input channels send to Aux is turned on or active.
4. Indicates, when illuminated orange that the selected channels are sending Pre Fader.
5. Aux overview and selection area. Press and hold to select all current viewable Auxes or Matrices.
6. Adjustments to level can be changed by an Absolute, Relative or Pass-thru value as described earlier in this user guide.
7. Unity sets level to 0 dB for swift set up operation.
8. If multiple channels are selected and 1 aux or matrix, selected channels can be unfolded to the vertical assignable controls to the left of the GUI for individual
channel level and pan changes. See the next section for more details on unfolding.
9. Send level control, function changes according to the settings.
10. C/O changes the send level control to the send pan control.
11. Turns the channels send on to the selected Auxes or Matrices.
12. Changes selected channels send between PRE or Post Fader.
13. Sets the channel to the default pick o point.
14. Sets the pick o point to Post Filter.
15. Sets the pick o point to Post Equaliser.
16. Sets the pick o point to Post Insert.
17. Sets the pick o point to Post Dynamics.
18. Turns an Aux into a Flexi Aux (Allowing stem style Aux to Aux mixing).
19. Group mode turns an Aux into a xed send group (think old subgroups on an analogue mixing desk).
To Next Page
Loading...
Need help?
General
