61 HD96-24-CC-TP User Manual
To use the One-Shot Pot:
1. Navigate to the Assignables Page in the side bar menu using the arrows.
2. Select the rotary control you wish to use (must be visible on the GUI) which automatically places the rotary control to the rst vertical assignable.
3. The button to the right of the assignable control turns green when pressed which pins the selected function to the assignable control. Pressing the button again
clears the Assigned control.
Clipped Channels, fault nding a problem channel
The Clipped Channels page displays all channels whose level has exceeded the pre-dened threshold more times than the set number of occurrences.
1. Threshold can be set by tapping and changing the value with the pop-up keypad. Any channel clipping above the set threshold more than the dened number of
occurrences will be displayed here.
2. Occurrences sets the amount of times a channel has to clip in order to appear in the clipped channel banks list. This is sample based so one clipped bass note could
be several samples.
3. Bank selection based on the order in which channels have clipped.
To Next Page
Loading...
Need help?
General
