Midas HD96-24-CC-TP User Manual

288 HD96-24-CC-TP User Manual
Compressor Page
Compressor Solo view
In the Compressor page, If one path is selected the compressor for that path is displayed and can be edited in a similar way to the main Compressor found in the
various workows and widgets with some parameters controlled by the vertical assignable controls.
1. Compression graph (can be used to adjust threshold by swiping up and down).
2. Sidechain frequency display (swipe left to right to change frequency).
3. Input level meters.
4. Gain reduction meters.
5. Compression knee type selection (Soft, Medium or Hard).
6. Compression mode (Corrective, Adaptive, Creative or Vintage modes).
7. Threshold (-50 dB to +25 dB). Adjust the point at which compression occurs.
8. Compression On button.
9. Ratio control (1:0 to 25:1).
10. Attack control (200 us to 100 ms).
11. Release control (50 ms to 3 s).
12. Make-up gain (0 dB to 24 dB).
13. Sidechain source selection.
14. Sidechain listen, sends the signal from the channel’s sidechain to the solo bus for audition.
15. Sidechain width control (0.1 Oct, 0.3 Oct, 1 Oct or 2 Oct).
16. Sidechain frequency control (50 Hz to 15 kHz).
17. Sidechain On button.

Midas HD96-24-CC-TP Specifications

General

Brand	Midas
Model	HD96-24-CC-TP
Category	DJ Equipment
Language	English