Midas HD96-24-CC-TP User Manual

182 HD96-24-CC-TP User Manual
Glow
From the depths of Mordor the Glow eect brings intense heat and grit to your sounds. Used on a drum group, Glow can add anything from a dash of saturation and
glue to an enriched harmonic explosion. You can use it to add a boost to the low mid frequency content and can add a tiny bit of crunch to poke this area through in the
mix. Turn up the input trim and balance with the output trim to add more harmonics and compression. The Heat preset can be used to add a tube like glow while the
Intense setting adds pleasing saturation to your signal.
Item Control Function
1 Input meter Magma meters, which show input metering.
2 Glow control Controls the amount of glow magma glue being applied. Range 1 - 5.
3 Type selection There are two mystical harmonic types. Heat and Intense.
4 Drive control Adjusts the harmonic drive from 1 to 5.
5 Input Trim control Adjust the trim level into the eect. Range +-12 dB.
6 Mix control Adjust the wet/dry mix of the band from 0% to 100%.
7 Output Trim control Adjust the trim level output of the eect. Range +-12 dB.
8 On/O button On/O control for the distortion.
9 Output meter Magma meters, which show output metering.

Midas HD96-24-CC-TP Specifications

General

Brand	Midas
Model	HD96-24-CC-TP
Category	DJ Equipment
Language	English