Midas HD96-24-CC-TP User Manual

269 HD96-24-CC-TP User Manual
Mixes
Each input channel can send a variable contribution to each of the 96 exi-aux busses (aux sends) and to each of the 24 matrix busses. The bus contributions are
controlled by either the assignable controls or ip to faders that give continuous adjustment (in the range +6dB to o) of subgroup levels sent to matrix mixes. The
controls in the assignable sections can include pan and level control for each bus, whose function depends on the current bus mode in operation.
1. Desired busses are ipped using the Flip button in the GUI or from the global assignable shortcuts. When input faders are ipped the LCD displays show Flipped
To, which indicates Flip mode is active and the target aux or matrix. Select the Auxes or Matrices via the 4 tabs.
2. Select the mix or mixes you wish to adjust.
3. Aux Send On.
4. Aux Send Pre/Post.
5. Tap o point selection.
6. Choose how changes are made either Relative, Absolute or Pass Thru.
7. Send level changes are made here.
8. Long press to set sends to unity, 0 dB.
9. Send Pan position.

Midas HD96-24-CC-TP Specifications

General

Brand	Midas
Model	HD96-24-CC-TP
Category	DJ Equipment
Language	English