85 HD96-24-CC-TP User Manual
Setting a Pre-Amp’s input gain
The surface has two types of input level adjustment per channel, one is the remote Gain for the analogue microphone pre-amp (stage box gain) and the other is the
digital Trim (console gain). In the CONFIG section there are dedicated controls for both Gain and Trim. Adjustments of any selected channel Gain can be made here in
2.5dB steps for most I/O boxes (-2.5dB to +45dB for Gain and -40dB to +20dB for Trim). Both Gain and Trim values can be seen in the channel view widget which can
be automatically displayed when the gain or trim pot is touched.
Tip: Locking the Gain rotary to screen is a great way to quickly set the gains for channels in a line check by selecting each channel in turn and adjusting the
locked-to-screen rotary as required.
To Next Page
Loading...
Need help?
General
