174 HD96-24-CC-TP User Manual
Item Control Function
13 Below
When the switch is depressed to select Below the threshold’s sensitivity setting remains the same,
but the processing is ‘turned on its head’ as compression or expansion is now only applied to signal’s
which are below the threshold. Below threshold compression now works like a frequency sensitive
gate in that the further below the threshold the signal is, the more it is attenuated. There being
progressively less attenuation as signal level increases to approach the threshold setting. Below
threshold expansion acts to boost the selected frequency range up to (but not above) the threshold.
14 Fast Rel When depressed for FAST, the compress/expand release time is speeded.
15 Fixed Makes each band in to a xed EQ and removes the dynamic function.
16 Listen
Long press this button to latch it on and send the side chain signal of that band to the solo bus. This
will include any ltering, and allows you to set up the signal that will subsequently be removed or
expanded by the dynamics processing.
17 IN Activated each band of dynamic EQ individually.
18 ON Turns the whole dynamic eq on/o.
XL4 EQ
The XL4 EQ is identical in operation to the Midas channel EQ. Details on its use can be found in the Basic Operation chapter. It can be used to add extra bands of Midas
EQ to an input or output if required.
To Next Page
Loading...
Need help?
General
