Texas Instruments Voyage 200 User Manual

Basic Function Graphing 335
Finding an Arc Length
Finding an Arc LengthFinding an Arc Length
Finding an Arc Length
1. From the
Graph screen, press ‡ and select B:Arc.
2. As necessary, use D and C to select the applicable function.
3. Set the first point of the arc. Either use A or B to move the cursor or type the x
value.
4. Press ¸. A
+ marks the first point.
Shading the Area between a Function and the x Axis
Shading the Area between a Function and the x AxisShading the Area between a Function and the x Axis
Shading the Area between a Function and the x Axis
You must have only one function graphed. If you graph two or more functions, the Shade
tool shades the area between two functions.
1. From the
Graph screen, press ‡ and select C:Shade. The screen prompts for Above
X axis?
2. Select one of the following. To shade the function’s area:
• Above the x axis, press ¸.
• Below the x axis, press:
N
5. Set the second point, and press ¸.
A
+ marks the second point, and the arc
length is displayed.

Texas Instruments Voyage 200 Specifications

General

Type	Scientific
Form factor	Pocket
Product color	Blue
Display resolution	128 x 240 pixels