Texas Instruments Voyage 200 User Manual

Appendix B: Technical Reference 942
Replacing the Lithium Battery in the Voyage 200
To replace the lithium backup battery, remove the battery cover. Insert a blunt object into
the circular indentation next to the battery. Gently place a finger on the lithium battery
and pry the battery out.
Slide in a new CR1616 or CR1620 battery, positive (+) side up. Press firmly to snap the
new lithium battery into place.
AAA alkaline battery compartment Lithium battery

Texas Instruments Voyage 200 Specifications

General

Type	Scientific
Form factor	Pocket
Product color	Blue
Display resolution	128 x 240 pixels