Alcatel-Lucent OmniSwitch 6860 Series User Manual

Configuring MVRP Configuring MVRP
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 12-8
Configuring MVRP Registration
MVRP allows a port to register and de-register static VLANs. Every device has a list of all the switches
and end stations that can be reached at any given time. When an attribute for a device is registered or de-
registered, the set of reachable switches and end stations, also called participants, is modified. Data frames
are propagated only to registered devices, thereby preventing attempts to send data to devices that are not
reachable.
The following sections describe MVRP registration on switches:
Setting MVRP Normal Registration
The normal registration mode allows dynamic creation, registration, and de-registration of VLANs on a
device. The normal mode is the default registration mode.
To configure a port in normal mode, use the mvrp registration command. For example, to configure port
2 of slot 1 in normal mode, enter the following:
-> mvrp port 1/2 registration normal
To view the registration mode of the port, use the show mvrp port command. For example:
-> show mvrp port 1/2
MVRP Enabled : no,
Registrar Mode : normal,
Applicant Mode : participant,
Join Timer (msec) : 600,
Leave Timer (msec) : 1800,
LeaveAll Timer (msec) : 30000,
Periodic Timer (sec) : 1,
Periodic Tx status : disabled
Setting MVRP Fixed Registration
The fixed registration mode allows only manual registration of the VLANs and prevents dynamic or static
de-registration of VLANs on the port.
To configure a port to fixed mode, use the mvrp registration command. For example, to configure port 2
of slot 1 to fixed mode, enter the following:
-> mvrp port 1/2 registration fixed
To view the registration mode of the port, use the show mvrp port command. For example,
-> show mvrp port 1/2
MVRP Enabled : no,
Registrar Mode : fixed,
Applicant Mode : participant,
Join Timer (msec) : 600,
Leave Timer (msec) : 1800,
LeaveAll Timer (msec) : 30000,
Periodic Timer (sec) : 1,
Periodic Tx status : disabled
Note. The registration mode for the default VLANs of all the ports in the switch is set to normal.

Alcatel-Lucent OmniSwitch 6860 Series Specifications

General

Brand	Alcatel-Lucent
Model	OmniSwitch 6860 Series
Category	Switch
Language	English