Configuring QoS QoS Defaults
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 26-33
QoS Defaults
The following tables list the defaults for global QoS parameters, individual port settings, policy rules,
default policy rules, and queue management profiles.
Global QoS Defaults
Use the qos reset command is to reset global values to their defaults.
QoS Port Defaults
Use the qos port reset command to reset port settings to the defaults.
Description Command Default
QoS enabled or disabled qos enabled
Whether ports are globally
trusted or untrusted
qos trust-ports VLAN Stacking ports are
always trusted; all other port
types are untrusted
Statistics interval qos stats interval 60 seconds
Level of log detail qos log level 5
Number of lines in QoS log qos log lines 10000
Whether log messages are sent
to the console
qos log console no
Whether log messages are
available to OmniVista
applications
qos forward log no
Whether IP anti-spoofing is
enabled on UserPorts.
qos user-port filter yes
Whether a UserPorts port is
administratively disabled when
unwanted traffic is received.
qos user-port shutdown no
Global default DEI bit setting
for ports
qos dei disabled
Priority for IP Phone
connections.
qos phones trusted
Description Command/keyword Default
Whether the port is trusted or
untrusted
qos port trusted VLAN Stacking ports are
always trusted; all other
port types are untrusted.
The maximum egress bandwidth qos port maximum egress-bandwidth port bandwidth
The maximum ingress bandwidth qos port maximum ingress-bandwidth port bandwidth
To Next Page
Loading...
Need help?
General
