Configuring Access Guardian Access Guardian Defaults
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 28-6
See “UNP Ports” on page 28-21 for more information.
Access Guardian Global AAA Parameter Defaults
The following default AAA (authentication, authorization, and accounting) parameter settings are applied
to Access Guardian device authentication and accounting sessions:
The type of service (SPB or
VXLAN) automatically created
based on traffic received on the
UNP access port.
unp dynamic-service No service is dynamically
created.
The amount of time before an
EAP Request Identity is
retransmitted.
unp 802.1x-authentication tx-period 30 seconds
The amount of time before the
switch times out an 802.1X user
attempting to authenticate.
unp 802.1x-authentication supp-timeout 30 seconds
The maximum number of
requests retransmitted before
the session times out.
unp 802.1x-authentication max-req 2
Layer 2 profile that specifies
how control packets are
processed on UNP access ports.
unp l2-profile unp-def-access-profile
Description Command Default
The RADIUS server
configuration for device
authentication.
aaa device-authentication None
The RADIUS server or switch
logging configuration for
accounting sessions.
aaa accounting None
The RADIUS Calling-Station-
Id attribute value
aaa accounting radius calling-station-id User MAC address
The status of automatic 802.1X
re-authentication.
aaa 802.1x re-authentication Disabled
The amount of time between
interim accounting updates per
user session.
aaa interim-interval 600 seconds
User session time limit. aaa session-timeout Timer is disabled
The amount of time before an
inactive user is logged out of a
session.
aaa inactivity-logout Timer is disabled
The RADIUS NAS-Port
attribute value
aaa radius nas-port-id User port
(chassis/slot/port)
Description Command Default
To Next Page
Loading...
Need help?
General
