Configuring Application Monitoring and Enforcement Verifying AppMon Configuration
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 29-20
Verifying AppMon Configuration
A summary of the show commands used for verifying the AppMon configuration is given here.
show app-mon config Displays global AppMon configuration, which includes information
about admin-state, running mode, IP mode, aging-timer, and total
signatures.
show app-mon port Displays AppMon status per physical port or per slot for the switch.
show app-mon app-pool Displays all the applications that are part of an application pool.
show app-mon app-list Displays a list of applications and application groups added to an
application list.
show app-mon app-group Displays the details of all the applications in an application group.
show app-mon app-record Displays current-hour application-record information as well the
historic application-records on the hourly or 24-hours basis for
monitored applications.
show app-mon ipv4-flow-table Displays the flow table for IPv4 flows entries for enforcement and
monitor flows.
show app-mon ipv6-flow-table Displays the flow table for IPv6 flows entries for enforcement and
monitor flows.
show app-mon l4port-exclude Displays the port range excluded from AppMon operation.
show app-mon stats Displays the number of flow statistics.
show app-mon aging
enforcement
Displays the aging interval for each application for enforcement feature.
show app-mon vc-topology Displays the AppMon VC topology.
To Next Page
Loading...
Need help?
General
