Alcatel-Lucent OmniSwitch 6860 Series User Manual

Managing Source Learning Displaying Source Learning Information
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 3-10
Displaying Source Learning Information
To display MAC Address Table entries, statistics, and aging time values, use the show commands listed
below:
For more information about the resulting displays from these commands, see the OmniSwitch AOS
Release 8 CLI Reference Guide.
show mac-learning Displays a list of all MAC addresses known to the MAC address
table, including static and multicast MAC addresses.
show mac-learning aging-time Displays the current MAC address aging timer value by switch or
VLAN.
show mac-learning mode Displays the current status of the distributed MAC source learning
mode.

Alcatel-Lucent OmniSwitch 6860 Series Specifications

General

Model	OmniSwitch 6860 Series
Category	Switch
Maximum Ports	48
Switching Capacity	Up to 176 Gbps
Operating System	AOS (Alcatel-Lucent Operating System)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Relative Humidity	5% to 95% non-condensing
Port Types	10/100/1000BASE-T, SFP+, QSFP+
Ports	24, 48
Power over Ethernet (PoE)	Yes
Stacking	Yes
Operating Temperature	0°C to 50°C (32°F to 122°F)
Form Factor	1U rack-mountable
MAC Address Table Size	32, 000
Jumbo Frame Support	Yes
Dimensions (W x D x H)	440 mm x 420 mm x 44 mm (17.3 in x 16.5 in x 1.73 in)
Power Supply	AC or DC (depending on model)
Power Consumption	Varies by model and configuration