Configuring VRRP VRRP Defaults
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 23-2
VRRP Defaults
The following table lists the defaults for VRRP configuration through the vrrp|vrrp3 command and the
relevant command keywords:
The following table lists the defaults for VRRPv2 configuration using the VRRP collective management
features and the relevant command (VRRPv3 does not support the collective management functionality in
this release):
In addition, other defaults for VRRP include:
Description Keyword Default
Virtual router enabled or
disabled
enable | disable Virtual routers are disabled
Priority priority 100
Preempt mode preempt | no preempt Preempt mode is enabled
Advertising interval advertising interval VRRPv2 = 1 second
VRRPv3 = 100 centiseconds
Default advertising interval for
all the virtual routers on the
switch.
vrrp interval 1 second
Default priority value for all the
virtual routers on the switch.
vrrp priority 100
Default preempt mode for all the
virtual routers on the switch.
vrrp preempt preempt
Parameter value that is to be set
and/or override with the new
default value in all the virtual
routers on the switch.
vrrp set all
Default advertising interval for
all the virtual routers in the
group.
vrrp group 1
Default priority value for all the
virtual routers in the group.
vrrp group 100
Default preempt mode for all the
virtual routers in the group.
vrrp group preempt
Parameter value that is to be set
and/or override with the new
default value in all the virtual
routers in the group.
vrrp group set all
Description Command Default
VRRP traps vrrp|vrrp3 trap Enabled
VRRP delay vrrp delay 45 seconds
To Next Page
Loading...
Need help?
General
