Configuring Application Fingerprinting Verifying the AFP Configuration
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 30-18
Verifying the AFP Configuration
A summary of the show commands used for verifying the AFP configuration is given here. For some
examples of these commands, see “Quick Steps for Configuring AFP” on page 30-4 and “Configuring
AFP” on page 30-10.
show app-fingerprint
configuration
Displays the global AFP configuration for the switch. This includes the
global status of the feature and trap generation and the name of the
REGEX signature file currently in use.
show app-fingerprint port Displays the AFP port configuration for the switch, including the
operational mode and application group applied to the port.
show app-fingerprint app-
name
The application signatures defined in the REGEX signature file.
show app-fingerprint app-
group
Displays the application groups defined in the REGEX signature file.
show app-fingerprint database Displays the database entries generated by AFP to identify applications
detected on AFP ports.
show app-fingerprint statistics Displays packet count statistics for the number of packets sampled and
packets matched. Also includes the application signature name for the
matched packet counts.
To Next Page
Loading...
Need help?
General
