Configuring Application Monitoring and Enforcement Configuring AppMon
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 29-10
Configuring AppMon
This section provides the following information about how to configure AppMon on the OmniSwitch:
• “Configuration Guidelines” on page 29-11.
• “Enabling/Disabling AppMon” on page 29-13.
• “Enabling/Disabling AppMon Per Port or Slot” on page 29-13
• “Create Auto-Groups” on page 29-14
• “Configuring Application Group” on page 29-14.
• “Configuring Application List” on page 29-15.
• “Activate Applications for AppMon” on page 29-15
• “Configuring L3 Mode of Operation” on page 29-16
• “Configuring L4 Mode of Operation” on page 29-16
• “Clearing Flow Table Entries” on page 29-17
• “Configuring Flow Table Statistics Update” on page 29-17
• “Configuring Aging Interval” on page 29-17
• “Configuring Logging Threshold” on page 29-18
• “Configuring Sync Interval” on page 29-18
• “Configuring Force Flow Sync” on page 29-18
• “Clearing Application List” on page 29-19
• “Configuring AppMon Enforcement QoS Policy Rules” on page 29-19
To Next Page
Loading...
Need help?
General
