OmniSwitch AOS Release 8 Network Configuration Guide December 2017 xxi
About This Guide
This OmniSwitch AOS Release 8 Network Configuration Guide describes basic attributes of your switch
and basic switch administration tasks. The software features described in this manual are shipped standard
with your switches. These features are used when readying a switch for integration into a live network
environment.
Supported Platforms
The information in this guide applies only to the following products:
• OmniSwitch 9900 Series
• OmniSwitch 6900 Series
• OmniSwitch 6860 Series
• OmniSwitch 6865 Series
• OmniSwitch 6560 Series
Who Should Read this Manual?
The audience for this user guide are network administrators and IT support personnel who need to config-
ure, maintain, and monitor switches and routers in a live network. However, anyone wishing to gain
knowledge on how fundamental software features are implemented in the OmniSwitch Series switches
will benefit from the material in this configuration guide.
When Should I Read this Manual?
Read this guide as soon as your switch is up and running and you are ready to familiarize yourself with
basic software functions. You should have already stepped through the first login procedures and read the
brief software overviews in the appropriate Hardware Users Guide.
You should have already set up a switch password and be familiar with the very basics of the switch soft-
ware. This manual will help you understand the switch’s directory structure, the Command Line Interface
(CLI), configuration files, basic security features, and basic administrative functions. The features and
procedures in this guide will help form a foundation that will allow you to configure more advanced
switching features later.
To Next Page
Loading...
Need help?
General
