Configuring Access Guardian BYOD Application Examples
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 28-143
BYOD Network with Employee and Guest Devices
Application Example 1: 802.1X — OmniSwitch Configuration
The OmniSwitch configuration for an 802.1X supplicant:
1 Enable UNP port-based functionality as follows:
-> unp port 1/1/11 port-type bridge
-> unp port 1/1/11 802.1x-authentication
2 Configure 802.1X authentication for ClearPass RADIUS on the OmniSwitch as follows:
-> aaa radius-server alu-cppm host 10.255.95.250 key ale
-> aaa device-authentication 802.1x alu-cppm
3 Configure the UNP profile as follows:
-> unp profile UNP-employee
-> unp profile UNP-employee map vlan 96
RADIUS Server
ClearPass
RADUS/RADIUS
Proxy
“alu-cppm”
(10.255.13.250)
authentication
request
authorization
response
OmniSwitch (10.255.13.26)
Guest - MAC
Authentication
Employee - 802.1X
IP Phone - MAC
Authentication
To Next Page
Loading...
Need help?
General
