Alcatel-Lucent OmniSwitch 6860 Series User Manual

Configuring Learned Port Security Displaying Learned Port Security Information
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 33-19
Displaying Learned Port Security Information
To display Learned Port Security (LPS) port and table information, use the show commands listed below:
For more information about the resulting display from these commands, see the OmniSwitch AOS Release
8 CLI Reference Guide. An example of the output for the show port-security, show port-security
learning-window, and show violation commands is also given in “Sample Learned Port Security
Configuration” on page 33-3.
show port-security Displays the LPS configuration and table entries.
show port-security learning-window Displays the amount of time during which source learning can
occur on all LPS ports.
show violation Displays the address violations that occur on ports with LPS
restrictions.

Alcatel-Lucent OmniSwitch 6860 Series Specifications

General

Brand	Alcatel-Lucent
Model	OmniSwitch 6860 Series
Category	Switch
Language	English