Version 6.2 131 February 2011
SIP User's Manual 3. Web-Based Management
¾ To configure number manipulation rules:
1. Open the required 'Number Manipulation' page (Configuration tab > VoIP menu >
GW and IP to IP submenu > Manipulations submenu > Dest Number IP->Tel, Dest
Number Tel->IP, Source Number IP->Tel, or Source Number Tel->IP); the relevant
Manipulation table page is displayed (e.g., 'Source Phone Number Manipulation Table
for TelÆIP Calls' page).
Figure 3-82: Source Phone Number Manipulation Table for Tel-to-IP Calls
The figure above shows an example of the use of manipulation rules for Tel-to-IP
source phone number manipulation:
• Index 1: When the destination number has the prefix 03 (e.g., 035000), source
number prefix 201 (e.g., 20155), and from source IP Group ID 2, the source
number is changed to, for example, 97120155.
• Index 2: When the source number has prefix 1001 (e.g., 1001876), it is changed
to 587623.
• Index 3: When the source number has prefix 123451001 (e.g., 1234510012001),
it is changed to 20018.
• Index 4: When the source number has prefix from 30 to 40 and a digit (e.g.,
3122), it is changed to 2312.
• Index 5: When the destination number has the prefix 6, 7, or 8 (e.g., 85262146),
source number prefix 2001, it is changed to 3146.
2. Configure the Number Manipulation table according to the table below.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 169.
To Next Page
Loading...
Need help?
General
