AudioCodes MediaPack MP-124 User Manual

Version 6.2 497 February 2011
SIP User's Manual 10. Configuration Parameters Reference
10.14.2 Automatic Update Parameters
The automatic update of software and configuration files parameters are described in the
table below.
Table 10-64: Automatic Update of Software and Configuration Files Parameters
Parameter Description
General Automatic Update Parameters
[AutoUpdateCmpFile]
Enables or disables the Automatic Update mechanism for the cmp
file.
 [0] = The Automatic Update mechanism doesn't apply to the cmp
file (default).
 [1] = The Automatic Update mechanism includes the cmp file.
Note: For this parameter to take effect, a device reset is required.
[AutoUpdateFrequency]
Determines the number of minutes the device waits between
automatic updates. The default value is 0 (i.e., the update at fixed
intervals mechanism is disabled).
Note: For this parameter to take effect, a device reset is required.
[AutoUpdatePredefinedTime]
Schedules an automatic update to a user-defined time of the day.
The format of this parameter is: 'HH:MM', where HH depicts the
hour and MM the minutes, for example, 20:18.
Notes:
 For this parameter to take effect, a device reset is required.
 The actual update time is randomized by five minutes to reduce
the load on the Web servers.
EMS: AUPD Verify Certificates
[AUPDVerifyCertificates]
Determines whether the Automatic Update mechanism verifies
server certificates when using HTTPS.
 [0] = Disable (default)
 [1] = Enable
[AUPDCheckIfIniChanged ]
Determines whether the Automatic Update mechanism performs
CRC checking to determine if the ini file has changed prior to
processing.
 [0] = Do not check CRC. The ini file is loaded whenever the
server provides it. (default)
 [1] = Check CRC for the entire file. Any change, including line
order, causes the ini file to be re-processed.
 [2] = Check CRC for individual lines. Use this option when the
HTTP server scrambles the order of lines in the provided ini file.
[ResetNow]
Invokes an immediate device reset. This option can be used to
activate offline (i.e., not on-the-fly) parameters that are loaded using
the parameter IniFileUrl.
 [0] = The immediate restart mechanism is disabled (default).
 [1] = The device immediately resets after an ini file with this
parameter set to 1 is loaded.

AudioCodes MediaPack MP-124 Specifications

General

Brand	AudioCodes
Model	MediaPack MP-124
Category	Gateway
Language	English