Version 6.2 61 February 2011
SIP User's Manual 3. Web-Based Management
3.3.1.3 Configuring Syslog Settings
The 'Syslog Settings' page allows you to configure the device's embedded Syslog client.
For a detailed description on the Syslog parameters, see ''Syslog, CDR and Debug
Parameters'' on page 350.
For viewing Syslog messages in the Web interface, see Viewing
Syslog Messages on page 180.
For a detailed description on Syslog messages and using
third-party Syslog servers, refer to the Product Reference Manual.
¾ To configure the Syslog client:
1. Open the 'Syslog Settings' page (Configuration tab > System menu > Syslog
Settings).
Figure 3-35: Syslog Settings Page
2. Configure the parameters as required, and then click the Submit button to apply your
changes.
3. To save the changes to flash memory, see ''Saving Configuration'' on page 169.
To Next Page
Loading...
Need help?
General
